ph meters 

 

Note:
For our pH meters, we also can supply the Ready Buffer Solution (2 bottles one set, about 50ml), because of the Air Control Rule, we have to Apply DGM report. USD40.00 for each shipment. Also we can supply the empty bottles, the Buffer Solution Make Up Powder, each bag can make 250ML buffer solution with Distilled Water.


 
Order Number:
pH Buffer Solution in Powder:
BSP4: 4.00
BSP6: 6.86
BSP7: 7.00
BSP9: 9.18
BSP10: 10.01
                                          
Lab Grade Glass pH Combination Probe E520BNC                      
Performance features
High Quality which can replace for the top brand like WTW, used for high accuracy pH measurement, it is a commonly applied high performance combination electrode.
Main technical specifications:
*Measure range：0.00-14.00pH, Temp: 0~80℃
*BNC Connector
*Cable length: 1M
*Material: glass
*Dimension: 12 x 120mm
*Glass body, refillable KCL solution
                                        
Lab Grade Glass pH Combination Probe P11BNC (Made in UK)             
Performance features
General pH electrode, Uses for measuring the beer, blood products, cement, cosmetics, dairy products, fats/cream, fish products, low ionic, paint, soil samples.
Main technical specifications:
pH Range: 0 to 14pH
Temperature Range: 0 to 80℃
Ref. Type: AgCl
Junction Type: Annular Ceramic 　
Body Type: Glass; Connector: BNC 　
Dimensions: 12(Dia.)×120(L)mm

                                        
Milk Glass pH Combination  Probe E521BNC                      
Performance features
High Quality glass ph probe which can test milk, cream, used for high accuracy pH measurement, it is a commonly applied high performance combination electrode.
Main technical specifications:
*Measure range：0.00-14.00pH, Temp: 0~100℃
*BNC Connector
*Cable length: 92cm (3Feet)
*Material: glass
*Dimension: 12 x 120mm
*Glass body, refillable KCL solution
                                       
Surface plastic pH Combination  Probe E522BNC                      
Performance features
Surface probe easy to clean, widely used for fruits, surface ph test, .
Main technical specifications:
*Measure range：0.00-13.00pH, Temp: 0~80℃
*BNC Connector
*Cable length: 92cm (3Feet)
*Material: plastic
*Dimension: 12 x 120mm
                                          
Professional pH/mV Meter PH900                                    Manual
This meter is a perfect combination with the most advanced electronic technology, sensor technology and software design The meter can measure the parameters of pH, mV and temperature for high accuracy solution. It is the best portable pH meter with the highest performance and the lowest cost. It is suitable for the trade such as the mining industry, power plant, water treatment projects and environmental protection, etc., especially has more extensive application in the field and spot test

pH:

Measuring range

-2.00 to 19.99pH

Resolution

0.1/0.01 pH

Accuracy

Meter:±0.01pH; Complete Kit: ±0.02pH

Input current

≤2×10-12 A

Input impendance

≥1×1012 Ω

Stability

±0.01 pH/3h

Temp. Compensation Range

0 to 100℃ (automatic)

mV:

Measuring range (mV/ORP/EH)

-1999 mV to 0 to 1999mV

Resolution

1mV

Accuracy

Meter:±0.1% FS

Other Technical Parameters:

Data Storage

200 groups

Storage Content

Series number, measuring value, measuring unit and temperature

Power

Two AA batteries (1.5V x2)

Size and Weight

Meter: 65×120×31mm/180g  Carrying case:255 x 210x 50mm/790g

Quality and Safety Certification

ISO9001:2000, CE and CMC

Working Condition:

Environment Temperature

5 to 35 ℃ (0.01 grade)

Environmental Humidity

≤85%

IP Rating

IP57 Dustproof and waterproof
                                    
7 IN 1 Professional pH/ORP/Conductivity/TDS/Temp Meter PC900             
This meter is a perfect combination with the most advanced electronic technology, sensor technology and software design. The meter can measure the parameters of pH, mV, conductivity, TDS, salinity, resistivity, DO and temperature for high accuracy water solution. It is the best portable water analysis meter with the highest performance and the lowest cost. It is suitable for the trade such as the mining industry, power plant, water treatment projects and environmental protection, etc., especially has more extensive application in the field and spot test.

1. pH:

Measuring range

(-2.00 ~ 19.99) pH

Resolution

0.1/0.01 pH

Accuracy

Meter: ±0.01pH; Overall: ±0.02pH

Input current

≤2×10-12 A

Input impendance

≥1×1012 Ω

Stability

±0.01 pH/3h

Temp. Compensation Range

(0 to 100)℃ (automatic

2. ORP: (probe optional)

Measuring range

-1999mV to 0 to 1999mV

Resolution

1mV

Accuracy

 ±0.1% FS

3. Conductivity/TDS/Salinity/Resistivity:

Measuring range

 Conductivity: 0.00~19.99μS/cm; 20.0~199.9μS/cm; 200~1999μS/cm; 2.00~19.99mS/cm; 20.0~199.9mS/cm
TDS: 0 ~ 100g/L
Salinity:  0 ~ 100ppt
Resistivity: 0 ~ 100MΩ·cm

Resolution

0.01/0.1/1μS/cm   0.01/0.1 mS/cm

Accuracy

Meter: ±1.0% FS, Overall: ±1.5% FS

Temp. compensation range

0 ~ 50℃ (automatic)

Electrode constant

0.1 / 1 / 10 cm-1

Benchmark temperature

25℃, 20℃and 18℃
 4. Temperature: 32 to 212°F (0 to 100°C), pH and mV; 32 to 122°F (0 to 50°C), all other ranges

5. Others:

Data storage

300 groups

Storage content

 Series number, measuring value measuring unit and temperature,

Power

Two AA batteries (1.5V x2)

Size and weight

Meter: 65×120×31mm/180g; carrying case: 360×270×76mm/1.6Kg

Quality and safety certification

ISO9001:2000, CE, CMC

6. Working conditions:

5 to 35 ℃ (0.01 grade)

Environment temperature

5 to 35 ℃ (0.01 grade)

Environmental humidity

≤85%

IP rating

IP57 Dustproof and waterproof
                                    
8 IN 1 Professional pH/mV Conductivity/DO Meter EC900         Manual
This meter is a perfect combination with the most advanced electronic technology, sensor technology and software design. The meter can measure the parameters of pH, mV, conductivity, TDS, salinity, resistivity, DO and temperature for high accuracy water solution. It is the best portable water analysis meter with the highest performance and the lowest cost. It is suitable for the trade such as the mining industry, power plant, water treatment projects and environmental protection, etc., especially has more extensive application in the field and spot test.

pH:

Measuring range

(-2.00 ~ 19.99) pH

Resolution

0.1/0.01 pH

Accuracy

Meter: ±0.01pH; Overall: ±0.02pH

Input current

≤2×10-12 A

Input impendance

≥1×1012 Ω

Stability

±0.01 pH/3h

Temp. Compensation Range

(0 to 100)℃ (automatic)

mV: (probe optional)

Measuring range

-1999mV to 0 to 1999mV

Resolution

1mV

Accuracy

 ±0.1% FS

Conductivity:

Measuring range

 Conductivity:
  0.00 ~ 19.99μS/cm;  20.0 ~ 199.9μS/cm;  200 ~ 1999μS/cm  
  2.00 ~ 19.99mS/cm; 20.0 ~ 199.9mS/cm
TDS: 0 ~ 100g/L
Salinity:  0 ~ 100ppt
Resistivity: 0 ~ 100MΩ·cm

Resolution

0.01/0.1/1μS/cm   0.01/0.1 mS/cm

Accuracy

Meter: ±1.0% FS, Overall: ±1.5% FS

Temp. compensation range

0 ~ 50℃ (automatic)

Electrode constant

0.1 / 1 / 10 cm-1

Benchmark temperature

25℃, 20℃and 18℃

Dissolved Oxygen:

Measuring range

0 ~ 40.00mg/L (ppm); 0 ~ 200.0%

Resolution

0.1/0.01 mg/L (ppm); 1/0.1%

Accuracy

Meter: ±0.10 mg/L, Overall: ±0.40 mg/L

Response time

 ≤30 s (25℃, 90% response)

Residual current

≤0.1 mg/L

Temp. Compensation Range

0 to 45℃ (automatic)

Salinity Compensation Range

0 ~ 45ppt (automatic)

Barometric pressure

66 to 200kPa (manual)

Automatic Calibration

Air saturated by water; water saturated by air

Electrode type

Polarogram type

Other Technical Parameters:

Data storage

400 groups

Storage content

 Series number, measuring value measuring unit and temperature,

Power

Two AA batteries (1.5V x2)

Size and weight

Meter: 65×120×31mm/180g; carrying case: 360×270×76mm/1.6Kg

Quality and safety certification

ISO9001:2000, CE, CMC

Working Condition:

Environment temperature

5 to 35 ℃ (0.01 grade)

Environmental humidity

≤85%

IP rating

IP57 Dustproof and waterproof
                                          
Pen Type pH/ Meter                          

Features: Auto calibration, Auto identification of standard solutions, Auto power-off, low voltage alarm, Auto temperature compensation, Auto switches of range, IP57 dustproof and waterproof
Model PE01 PE02 PE03 PE05 PE06 PE07
Description pH Meter Conductivity Tester TDS Meter ORP Meter Salinity Meter

Range

 0~14.0pH 0~100.0μS/cm
0~1000μS/cm
0~10.00mS/cm		 0~50.0 ppm
0~500 ppm
0~5.00 ppt		 ±1000mV 0~5.00ppt 0~100.00ppt
Resolution 0.1pH 0.1/1μS/cm
0.01mS/cm		 0.1/1ppm
0.01ppt		 1mV 0.01ppt
Accuracy ±0.2pH ±1%FS ±1%FS ±0.5%FS ±1%FS ±1.5%FS
Calibration Solution:        YES                      YES                          YES NO YES
Power AAA batteries×2，1.5V×2
Dimension 39×25×176 mm
                                          
High Accuracy pH Meter PH-061                             
1.Measure Range: 0.00～14.00PH
2.Resolution:0.01PH
3.Accuracy: ±0.1PH
4.Automatic Temperature Compensation:0℃～50℃
5.Power supply:4×1.5V(AG-13 Battery)
6.Operating temperature: 0℃～50℃
7.Calibration: manual, 1 point
8.Dimension:155mm×31mm×16mm
9.Weight: 60g

                                          
High Accuracy Skin/Fruits pH Meter PH100                             
Range: pH: 0.00~14.00; Temp: -5~90℃
Resolution: pH: 0.01pH; Temp:±0.1℃
Accuracy: pH:±0.01pH; Temp: 0.1℃
ATC: 0~ 90℃
Data Record: 25
Power: CR2032 x 4 (3V)
Low battery indicate
pH electrode changeable
Auto off after 10 minutes
Size: 36 x 173 x 41mm
Weight: 110g
Also can check the clothes, carpet, fruits,

                                          
KL-98109 Skin Fruits Surface pH Meter         
Technical Specification:
Measuring range: 0.00 ~ 14.00PH
Accuracy: ±0.05PH
Resolution: 0.01PH
Operating Temperature: 0˚C~50˚C
Automatic Temperature Compensation: 0˚C~50˚C
Power Supply: 3×1.5V (AG13)
Dimensions: 200 ×51×25mm
Weight: 95g
Replaceable pH electrode
Data hold

                                          
KL-98102 portable pH Meter         
Product description：:
Designed with a 0.01 pH resolution and one-point manual calibration through easy-to-reach trimmers, it immediately displays pH variations to reflect the smallest change in
the sample.
With only two operation buttons, it allows immediate and precise response in a concise design. This is a rugged unit that can be used again and again. The probe is even
durable enough to be used as a stirrer.
The HOLD button will freeze the display reading for your documentation requirements.

Measuring range

0.00-14.00PH

Resolution

0.01PH

Accuracy

±0.1pH(@20℃); ±0.2PH

Power Supply

3×1.5V(AG13)

Operating Temperature

0℃～50℃

Dimensions

97mm×29mm×36mm

Weight

200g
                                          
Pen type pH Meter AZ8685                                               
•Big dual display Temp. & pH with ATC
•One touch for auto calibration up to 3 points
•Waterproof housing meets IP65 rating
•Automatic buffer recognition to avoid errors calibration

Range: pH: 0.0~14.0; Temp: 0~60℃
Resolution: pH: 0.1pH; Temp:±0.5℃
Accuracy: pH:±0.2pH; Temp: 1℃
ATC: 0~ 50℃
Power: LR44 x 4PCS
Low battery indicate
pH electrode changeable
Auto off after 20 minutes and data hold
Size: 165 x 35 x 32mm
Weight: 115g
                                          
KL-009(I) Serials Pocket-size pH meter    
Technical Specification:
Model: KL-009(I)  KL-009(I)A  KL-009(I)B (Plug Fixed Electrode BNC), KL-009(I)C (BNC Probe)
Measuring range: 0.0~14.0pH
Accuracy: KL-009(I): ±0.2PH,±0.1PH(at 20℃): KL-009(I)A: ±0.1PH
Resolution: 0.1PH
Operating Temperature: 0℃～50℃
Auto Temperature Compensation: 0～50℃ for KL-009(I)A
Dimensions 150×29×20mm
Weight: 51g

KL-009(I)

KL-009(I)A

KL-009(I)C
                                          
KL-009(II) High Accuracy Pen-type pH Meter   
Model: KL-009(II) KL-009(II)A (BNC Probe)
Measuring range: 0.00~14.00PH
Accuracy: ±0.1PH
Resolution: 0.01PH
Operating Temp: 0℃~50℃
Automatic Temperature Compensation: 0℃~50℃
Plug: KL-009(II): Fixed Electrode; KL-009(II)A: BNC
Power Supply: 4×1.5V(AG13)
Dimensions: 170×36×23(mm3)
Weight: KL-009(II) 85g; KL-009(II)A: 105g

                                          
KL-009(III) High Accuracy Pen-type pH Meter   
It uses combined pH electrode of high sensitivity, fast response, and good repetition as probe. With 3-1/2 liquid crystal digits display, the meter is reliable, stable, portable, and convenient to operate, especially for field measuring. Temperature compensation and temperature display.
Specifications:
Measuring range: 0.00~14.00PH, 0˚C~55˚C
Accuracy: ±0.1PH, ±1˚C
Resolution: 0.01PH 0.1˚C
Operating Temperature: 0℃~50˚C
Automatic Temperature Compensation (ATC): 0˚C~50˚C
Power Supply: 4×1.5V(AG13)
Dimensions: 170×36×23mm
Weight: 91g
                                          
KL-081 High Accuracy Pen-type pH Meter with Replaceable Probe  
Dual level LCD display
Automatic temperature compensation
Replaceable pH electrodes
To measure pH, simply switch on and dip into the sample, the pH reading is instantly displayed together with the
temperature of the sample on the easy to read, clear LCD digital display.

Measuring range

0.00~14.00PH; 0℃~55℃

Accuracy

±0.1PH ±1℃

Resolution

0.01PH 0.1℃

Operating Temperature

0℃~50℃

Automatic Temperature Compensation

0℃~50℃

Power Supply

4×1.5V(AG13)

Dimensions

175mm×42mm×23mm

Weight

200g
                                          
KL-096 Water Proof pH Meter                             
Large and easy-to-read LCD
Waterproof design
Data hold
Technical Specification:
Measuring range: 0.00~14.00PH
Accuracy: ±0.1PH
Resolution: 0.01PH
Operating Temperature: 0℃~50℃
Automatic Temperature Compensation: 0℃~50℃
Power Supply: 4 x 1.5V(AG13)
Dimensions: 180 x 45 x 30mm
Weight: 140g
 

                                          
KL-097 High Accuracy Water Proof pH Meter     
*Waterproof design
*Large and easy-to-read LCD
*Push-Button Calibration with Auto-Buffer Recognition - quick, easy calibration with no calibration mistakes
Technical Specification:
Range: PH 0.00～14.00PH; Temp 0～50℃
Accuracy: PH ±0.02 PH; Temp ±0.1℃
Resolution: PH 0.01PH; Temp 0.1℃
Operating temperature 0℃～50℃
Automatic Temperature Compensation 0℃～50℃
Power Supply 4×1.5V(AG13)
Calibration 2 points with auto buffer recognition
Dimensions: 188mm×45mm×30mm
Weight: 140g
 

                                          
PH-099 Combination pH and ORP Meter     

It designed for simultaneous pH and ORP measurements. It also reads temperature, which is continuously displayed on the dual level LCD.

Technical Specification:

Range

mV

±1999mV

pH

0.00 to 14.00 pH

Temperature

0 to 55°C

Resolution

mV

1 mV

pH

0.01 pH

Temperature

0.1°C

Accuracy

mV

±5mV

pH

±0.1 pH

Temperature

±1°C

Temperature Compensation

 0 to 50°C

Electrode

 replaceable pH electrode

fixed ORP sensor

Power Supply

 4 x 1.5V(AG13)

Environment

 0 to 50°C

Dimensions

 170 x 40 x 23 mm

Weight

 100 g

                                          
KL-035 Water Proof pH Meter                               
With Temperature Display
Replaceable pH electrode
Waterproof design
Data hold

Range: 0.00-14.00PH, 0°C～55°C
Resolution: 0.01PH, 0.1°C
Accuracy: ±0.1PH, ±1°C
Automatic Temperature Compensation: 0°C～50°C
Batteries: 4×1.5V(AG-13)
Operating Temperature: 0°C～50°C
Dimensions:188 x 35 x 35mm
Weight: 98g
                                          
AMT01 Water Proof pH/ORP Temp Meter   
(Standard packing without ORP Probe, if add ORP Probe Model AMT01R)
Technical Data:
Range:
pH: -2-16.00;    ORP: -1000-1000mv
Temperature: 0-90°C
Accuracy:
pH:±0.01+1digit;  ORP: ±2+ 1digit
Temp: ±0.2°C + 1digit
Resolution:
pH: 0.01;  ORP: 1;  Temp: 0.1°C
ATC: pH: 0-90°C
Power: DC1.5V x 4 battery size: AAA/UM-4
 
                                          
AMT02 Water Proof Conductivity/TDS/Salt/Temp Meter   
Technical Data:
Range:
Conductivity: 0-2000uS; 2.00-20.00mS
TDS: 0-1300ppm, 1.30-13.00ppt
Salt: 0-1000ppm; 1.00-12.00ppt
Temperature: 0-90°C
Accuracy:
Conductivity, TDS, Salt: ±2% F.S.
Temp: ±0.2°C + 1digit
Resolution:
Cond.: 1uS/0.01mS;  TDS: 1ppm/0.01ppt; Salt: 1ppm/0.01ppt;  Temp: 0.1°C
ATC: Cond/TDS/Salt: 0-50°C
Power: DC1.5V x 4 battery size: AAA/UM-4
 
                                          
AMT03 Water Proof pH/ORP/Conductivity/TDS/Salt/Temp Meter   
(Standard packing without ORP Probe, if add ORP Probe Model AMT03R)
Technical Data:
Range:
pH: -2-16.00;    ORP: -1000-1000mv
Conductivity: 0-2000uS; 2.00-20.00mS
TDS: 0-1300ppm, 1.30-13.00ppt
Salt: 0-1000ppm; 1.00-12.00ppt
Temperature: 0-90°C
Accuracy:
pH:±0.01+1digit;  ORP: ±2+ 1digit
Conductivity, TDS, Salt: ±2% F.S.
Temp: ±0.2°C + 1digit
Resolution:
pH: 0.01;  ORP: 1;  Cond.: 1uS/0.01mS;  TDS: 1ppm/0.01ppt; Salt: 1ppm/0.01ppt;  Temp: 0.1°C
ATC: pH: 0-90°C; Cond/TDS/Salt: 0-50°C
Power: DC1.5V x 4 battery size: AAA/UM-4
 
                                          
KL-03(I) High Accuracy pH Meter            
*Slim pen-style design has handy belt clip
*Easy to handle and simple to store
*Easy-to-read LCD displays clear reading in seconds

Technical Specification:
Range: 0.00-14.00PH
Resolution: 0.01PH
Accuracy: ±0.1PH
Temperature Compensation: 0℃～50℃
Power Supply: 2×3V (CR2032 Battery)
Operating Temperature: 0℃～50℃
Adjustment: 1 points
Dimension: 150mm×27mm×20mm
Weight: 46g

                                          
KL-03(II) Serials High Accuracy pH Meter         

Model

KL-03(II)

KL-03(II)L

KL-03(II)A

KL-03(II)B

Range

0.00~14.00pH

Accuracy

±0.1PH

Resolution

0.01PH

Operating temp

0℃~50℃

ATC

0℃~50℃

Plug

Fixed Electrode

 Extended Fixed Electrode BNC+1m cable

BNC

Power Supply

4×1.5V(AG13)

Dimensions

165×26×26mm

120mm×26mm×26mm

Weight

63g

65g

70g

68g

KL-03(II)

KL-03(II)L

KL-03(II)A

KL-03(II)B
                                          
KL-033 Serials High Accuracy pH Meter         
Model: KL-033; KL-033L
Technical Specification:
Measuring range: 0.00 ~ 14.00PH
Accuracy: ±0.1PH
Resolution: 0.01PH
Operating Temperature: 0˚C~50˚C
Automatic Temperature Compensation: 0˚C~50˚C
Power Supply: 4×1.5V (AG13)
Dimensions: 188×35×35mm
Large and easy-to-read LCD
Replaceable pH electrode
Waterproof design
Data hold

KL-033

KL-033L
                                          
KL-6020 pH Meter                                       Manual
Display LCD Size: 20 x 27 mm
Measurement Range: 0.00 to 14.00 pH; 0 to 50 ℃ (32 to 122 ℉)
Resolution: pH 0.01 pH; 0.1℃/ 0.1℉.
Accuracy:±0.02pH After calibration; ±0.8℃/±1.5 ℉.
pH Calibration:7.00/4.01/10.01, 3 points calibration.
Operating Humidity Less than 80% RH.
Dimension 188 x 38 mm
Weight: 82g (included electrode)

                                          
KL-6020A pH Meter                                       Manual
Display LCD Size: 20 x 27 mm.
Measurement Range: pH 0 to 14 pH.
Resolution: pH 0.01 pH.
Accuracy: pH ± 0.1 pH 
Data Hold Freeze the display reading.
pH Calibration pH 6.86, 1 point calibration.
Operating Humidity Less than 80% RH.
Dimension 188 x 40 x 35 mm
Weight 136 g (electrode included).

                                          
KL-6021A pH Meter                                       Manual
Display LCD Size: 20 x 27mm
Measurement Range: pH 0 to 14 pH.
Resolution: pH 0.1 pH.
Accuracy: pH ± 0.1 pH After calibration.
pH Calibration: pH 4.01, pH 6.86 and pH 9.18, 3 Point Calibration
Temp. Display: 0.1℃
Temp. Accuracy: 1℃
Working Temp. Range: 0 ~ 50℃
ATC: 0 ~ 100℃
Dimension: 188 x38 mm
Weight 82 g (electrode included).

                                          
KL-6022 pH Meter                                       Manual
SPECIFICATIONS
Display LCD Size: 20 x 27mm.
Measurement Range: 0.00 to 14.00 pH; 0 to 50 ℃ ( 32 to 122 ℉ ).
Resolution pH 0.01 pH; Temp. 0.1 ℃/ 0.1 ℉.
Accuracy: pH ± 0.02 pH After calibration; Temp. ± 0.8 ℃/ ± 1.5 ℉.
pH Calibration pH 6.86, pH 4.01 or pH 9.18, 3 points calibration.
Operating Humidity Less than 80% RH.
Dimension 188 x38 mm
Weight 82g (electrode included).

                                          
KL-010 Folding Three In One pH Tester          
Measuring range:
pH: 0.00 ~ 14.00
°C: -5 ~ 50°C (Environment)
RH: 10% ~ 99%RH (Environment)
Resolution: pH: 0.01PH;  °C: 0.1℃; RH: 1%RH
Accuracy PH ±0.1PH; °C: ±1°C; RH ±5%RH
Automatic Temperature Compensation: 0°C~50°C
Power Supply：4×1.5V(AG-13 Button Battery)
Operating Temperature: 0°C~50°C
Dimension：156mm×55mm×23mm
Weight: 95g
                                          
KL-0101 Folding Three In One pH Tester          
Technical Specification:
Measuring range: PH: 0.00～14.00PH; ℃: -5～50℃; RH: 10%～99%RH
Resolution: PH: 0.01PH; ℃: 0.1℃; RH: 1%RH
Accuracy: PH:±0.1PH; ℃: ±1℃; RH:±5%RH
Automatic Temperature Compensation: 0℃～50℃
Power Supply: 4×1.5V(AG13)
Operating Temperature: 0℃～50℃
Calibration: Manual 1 point
Dimensions: 156mm×55mm×23mm
Weight: 95g
                                          
KL-9810 Serial pH Meter                                    

Model

KL-98103

Range

0.00~14.00PH  

Accuracy

±0.2PH; ±0.1PH(at20℃)  

Resolution

0.01PH  

Operating temperature

0℃~50℃

Power Supply

3×1.5V(AG13)

Dimensions

175mm×51mm×25mm

Weight

57g

Model

KL-98105

KL-98106

KL-98107

 KL-98108

Range

0.00~14.00pH

Accuracy

±0.2PH, ±0.1PH(at20℃)

Resolution

0.01PH

Operating temperature

0℃~50℃

Automatic Temp Compensation

0℃~50℃

Electrode

 BNC+1m cable BNC BNC BNC Sharp Head

Power Supply

3×1.5V(AG13)

Dimensions

175mm×51mm×25mm

Weight

57g

                                          
KL-900 Serial pH Meter                                    
Resolution: 0.01pH
Measuring Range 0.00 - 14.00 pH
Accuracy: ± 0.03
Calibration 2 points
Plug fixed electrode
Temp 5 - 50°C (ATC)
Size 150 x 32 x 16 mm
Weight: 56g
 

                                          
PH-200 pH/Temp Meter                                   
Measuring Range:
0.00 - 14.00 pH, 0-80°C; 32-176°F
Resolution: 0.01pH, 1°C/F
Accuracy: ± 0.02
Automatic Temperature Compensation (ATC): 0-50°C
Calibration: Auto ranging to 4, 7 or 10 with fine tune digital calibration by push button.
Auto power off: After 5 minutes
Probe: Glass sensor and glass reference tube (single junction)
Display: LCD panel
Housing: Waterproof (submersible); floats
Power source: 3 x 1.5V button cell
Size: 185 x 34 x 34mm
Weight: 95g

                                          
PH-80 pH/Temp Meter                                   
FEATURES
•Measures pH and Temperature
•One-touch automatic digital calibration
•Water resistant
•Simultaneous temperature display
•Sleek, lightweight design
•Large LCD display
•Automatic Temperature Compensation (ATC)
•Auto-off function, data-hold function and low-battery indicator
•Includes storage solution in a sponge embedded in a translucent cap

SPECIFICATIONS
pH Range: 0 - 14
Temperature Range: 1-80 °C; 33-176 °F
Resolution: 0.1 pH; Temperature resolution is 0.1 °C/F
Accuracy: +/- 0.2 pH; Temperature accuracy is +/-2%
Calibration: Digital automatic calibration (one point)
Electrode: Glass sensor and reference tube electrodes
Housing: Water resistant
Power source: 3 x 1.5V button cell batteries (model 357A; included)
Dimensions: 15.3 x 3.2 x 1.8 cm (6.0 x 1.3 x 0.7 inches)
Weight: 53.9 g (1.9 oz)
                                          
Waterproof Pocket pH Tester PH10/20/30                

1. Two-Points Push-Button Calibration: The meter will remind pH standard solution. You need only immerse the electrode into pH standard solution and
press [CAL]. Then the meter will calibrate automatically.
2. Hold Function: When measure the sample solution, You need hold the
measure value. The function bring you lots of convenience. Waiting for the reading is stable, You only need press [HOLD], then the meter will hold the value.
3. Automatic Temperature Compensation: with temperature sensor, You can view temperature. The meter with automatic
temperature compensation function when in measurement.
4. Replaceable Electrode
5. Auto-Power Off: The meter will auto-power off after 8 minutes.
6. Waterproof Function: it will work properly even if it immersed in water, and it can float when fell into water.
Model PH10 PH20 PH30
pH Range　 0.0~14.0pH 0.0~14.0pH 0.00~14.00pH
pH Accuracy　 ±0.2pH ±0.1pH ±0.05pH
Resolution　 0.1pH 0.1pH 0.01pH
Temperature Range　 --- --- 0~60℃
Temperature Accuracy　 --- --- ±1℃
Calibration Points 2 points, (NIST, pH4.00/6.86/9.18 or USA, pH4.01/7.00/10.00)
Temperature Compensation　 --- --- 0~60℃, Automatic
Power Requirement　 3 x 1.5V alkaline button cell batteries
Battery Life 150 hours
Dimension 180(L) × 30(Dia.)mm
Weight　 85g
                                          
Portable pH/mV/Temp Meter PH-220                
1. Two Points Push-Button Calibration: The meter with two points calibration function, and it will display the tip of standard buffer solution, you need only immerse the electrode in standard solution and press [ENTER], then the meter will calibrate automatically.
2. Auto Recognition pH Standard Solution: In calibration, the meter will display tip automatically if you use standard solution by mistake or not by the direction.
3. Viewing of Electrode Slope: After calibration, the meter will indicate automatically
electrode slope, you can judge by the icon to replace it or not.
4. Automatic Temperature Compensation function: with temperature sensor, which can measure temperature of solution and can compensate temperature automatically.
5. Save Data: The meter can save data 50 sets. Press [SAVE], and the
meter will store current measured value automatically and serial number, date, time and other information.
6. Output Data: The data stored in meter can be sent to PC through link. You can also save measured value or print out test report via software.
Model PH-220
pH Range -2.00~16.00pH
pH Accuracy 　 ±0.01pH
mV Range 0~±1999mV
mV Accuracy 　 ±1mV
Temperature Range 0~100.0℃ or 32~212oF
Temperature Accuracy 　 ±1.0℃, ±1.8oF
Temperature Compensation 0~100.0℃, 32~212oF
Calibration Points 　 2 Points
pH Standard Solutions NIST, pH4.00/6.86/9.18 or USA, pH4.01/7.00/10.01
Memory 　 50
Output USB
Power Requirement 　 9V/800mA Battery
Display 4.3 inch LCD
Dimension 　 185(L)mm×88(W)mm×32(H)mm
Weight 300g
                                          
Portable pH/mV/Temp Meter PH-221                
The meter are used to measure acidity and alkalinity of liquids.
Microprocessor-Based:
PH-221 has built-in high performance CPU, it can work about 200 hours continuously with 9 volt battery.
Two Points Push-Button Calibration:
The meter with two points calibration function, it will prompt pH calibration solution when you calibrate the meter, you need only immerse the pH electrode into standard solution and press ENTER key, then the meter will be calibrated automatically.
Auto-Buffer Recognition:
In calibration, the meter will display ERROR if you use pH standard solution by mistake or not by the calibration prompt.
Viewing of Electrode Slope:
After calibration, the meter will indicate electrode slope, you can judge by the indicator to replace electrode or not.
Automatic Temperature Compensation:
PH-2 series with temperature sensor, you can view temperature value on the LCD, the meter with automatic temperature compensation for accurate reading under changing conditions.
Hold Function:
The meter with hold function, press MEAS/HOLD key, the meter momentarily freezes reading.
Message Indicator:
PH-2 series with operational message indicator. When you need setup or measurement, the message indicator will help you what you can do and how do it. You can set parameter or select functions under it's guide.
Save Data:
The meter can save 50 data sets, press SAVE key, and the meter will store current measured value, serial number, date, time and other information.
Output Data:
The data can be sent to computer through USB Communication interface, you can print out test report via software.

Model PH-221
pH Range -2.00~16.00pH
pH Accuracy ±0.01pH
mV Range 0~±1999mV
mV Accuracy ±1mV
ORP Range 0~±1999mV
ORP Accuracy ±2mV
Temperature Range 0~100.0℃ or 32~212oF
Temperature Accuracy ±1.0℃, ±1.8oF
Temperature Compensation 0~100.0℃, 32~212oF
Calibration Points 2 Points
pH Standard Solutions NIST, pH4.00/6.86/9.18 or USA, pH4.01/7.00/10.01
Memory 50
Output USB
Power Requirement　 9V/800mA Battery
Display 4.3 inch LCD
Dimension 185(L)mm×88(W)mm×32(H)mm
Weight 300g
                                          
KL-013 pH/mV/Temp Meter                                    
Technical Specification:
Measuring range: PH 0.00 ~ 14.00PH
mV: 0 ~±1999mV
Temp: 0 ~ 100°C
Accuracy: PH:±0.01pH, mV: ±0.1% F.S. ±1 digit, Temp: ±0.4°C
Resolution: PH: 0.01pH, mV: 1mV, Temp: 0.1°C
Environment Temperature: 0°C ~ 50°C; Humidity: ≤95%
Display: 4-digital LCD
Power Supply: 9V Battery
Input Impedance: 1012Ω
Dimensions: 180×83×46mm
Weight: 290g (Note: Standard packing without ORP probe, if add ORP probe order Number KL-013R)
                                          
KL-013M pH/mV/Temp Meter                                    
Technical Specification:
Range: pH: 0.00~14.00pH; mV: 0~±1999mV; Temp: 0~100℃
Accuracy: pH:±0.01pH; mV: ±0.1%F.S.±1digit; Temp:±0.4℃
Resolution: pH:0.01pH; mV: 1mV; Temp: 0.1℃
Working Temp: 0℃~50℃; Humidity:≤95%
Display: 4-digit LCD
Power Supply: 1×9V Battery
Input Impedance: 1012Ω
Dimensions: 123mm×72mm×33mm
Weight: 238g

Please note standard packing no ORP probe, if need ORP probe, model number KL-013MR
                                          
PH-113 pH/Temp Meter                                             
Technical Specification:
Range: 0.00～14.00pH; Temp: 0～100℃
Resolution: pH:0.01PH; Temp:0.1℃
Accuracy: pH:±0.02PH; Temp:±0.5℃
Display: pH:4-digit LCD; Temp:3-digit LCD
Automatic Temperature Compensation (ATC): 0℃～50℃
Power Supply: DC 9V
Operating Temperature: 0℃～50℃
Calibration: 2 points with auto buffer recognition
Dimensions: 123mm×72mm×33mm
                                          
KL-3385 pH Stick                                                                

Technical Specifications:
Range: 2.1~10.8
Resolution: 0.1
Accuracy: ±0.1
Temperature Compensation: Automatic
Operating Temperature: 0 - 50℃(32 - 122。F)
Calibration: Automatic, 2 point
Power Source: 3×1.5V AA Battery
Dimension: 415 x 23mm
Weight: 191g
                                          
ETP110 Soil pH  Meter                                                      
The pH meters for measuring the Soils pH value, it is good tool for plants, gardens, vegetables, trees ect. No battery needed.
Range: 3-10pH
Resolution: 0.2pH

                                          
ETP297 Soil Moisture Meter                                            

Features
* Neither too much nor too little water.
* The needle of the graduated dial indicates precisely the humidity of the soil
* Works without batteries or electricity
* Depth measurement by the long stem of the probe.
Specifications
* Hold the head of the moisture meter in your hand and insert the probe into the soil for 3/4 of the depth of the pot.
* The needle position will indicate soil humidity.

                                          
ETP298 Soil Moisture Meter                                            

Features
* Neither too much nor too little water.
* The needle of the graduated dial indicates precisely the humidity of the soil
* Works without batteries or electricity
* Depth measurement by the long stem of the probe.
Specifications
* Hold the head of the moisture meter in your hand and insert the probe into the soil for 3/4 of the depth of the pot.
* The needle position will indicate soil humidity.

                                          
ETP299 Soil Moisture Meter                                            

Features
* Neither too much nor too little water.
* The needle of the graduated dial indicates precisely the humidity of the soil
* Works without batteries or electricity
* Depth measurement by the long stem of the probe.
Specifications
* Hold the head of the moisture meter in your hand and insert the probe into the soil for 3/4 of the depth of the pot.
* The needle position will indicate soil humidity.

                                          
ETP300 Soil Moisture Meter                                            

Features
* Neither too much nor too little water.
* The needle of the graduated dial indicates precisely the humidity of the soil
* Works without batteries or electricity
* Depth measurement by the long stem of the probe.
Specifications
* Hold the head of the moisture meter in your hand and insert the probe into the soil for 3/4 of the depth of the pot.
* The needle position will indicate soil humidity.
                                          
ETP302 2 IN 1 pH/Moisture Plant Mate               
* Neither too much nor too little water.
* The needle of the graduated dial indicates precisely the humidity of the soil
* Works without batteries or electricity
* Depth measurement by the long stem of the probe up to 170mm.

For Soil Moisture
For Soil pH

                                          
ETP303 2 IN 1 Soil Fertility pH Meter                                            

Features
*Give accurate results of the PH and Fertility of the soil
*No batteries required
*The Ph portion of the tester utilizes the chemical reaction known as oxidation-reduction to measure PH within the range of 1-9
*The fertility portion of the tester measures the soil's nitrogen, phosphorous and potash (NPK) content, in combination. Fertility is within the range of too little, ideal and too much, with probe 85mm.
                                          
ETP306 3 IN 1 pH/Moisture/Sunlight Plant Mate               
* Neither too much nor too little water.
* The needle of the graduated dial indicates precisely the humidity of the soil
* Works without batteries or electricity
* Depth measurement by the long stem of the probe.

For Soil Moisture
For Soil pH
For Sunlight
                                          
ETP307 3 IN 1 pH/Moisture/Sunlight Plant Mate               
* Neither too much nor too little water.
* The needle of the graduated dial indicates precisely the humidity of the soil
* Works without batteries or electricity
* Depth measurement by the long stem of the probe up to 170mm.

For Soil Moisture
For Soil pH
For Sunlight
                                          
Soil pH & Moisture Meter KS-05                           
Range pH: 3-8 pH
Moisture: 1- 8
Size 160 x 50mm (diameter)
Weight 145g
Soil pH value is a very important factor for the quality of crops. Most Crops cannot survive in too acid or too alkaline soil. Get the right pH reading for your Crop is very important.
 
                                          
Soil pH & Moisture Meter KS-06                           
KS-06 is our NEWEST soil pH & moisture tester, It is an ESSENTIAL DEVICE, designed to accurately CHECK the ACIDITY and ALKALINITY (pH level) and moisture of the soil. With longer and slender metal electrode which measures 295mm in length to measure the pH level even beyond the root zone. Ensures durability for long and trouble-free life; Approved by strict quality and safety standards; Self-Powered, no battery is needed; Accurate and reliable and water-proof; Provides pH reading accurately fast; Measures the pH and moisture value of different kinds of soil; Great for quick pH & Moisture Reference of Vineyards, Orchards, Field Produce, Nurser Planters, Lawn Maintenance, Gardens, Planters
Specifications:
Measuring Range : 3-8 pH
Moisture : 1-8
Accuracy: ±0.2 pH (suitable for agricultural field and classroom experiments)
Operating Temp : 5-50°C (41-122°F)
Calibration : Remove oxidation from meal rings by light polishing

                                          
Solid pH & Moisture Meter KS-08                           
Size: 50.5 X 240mm Weight:100g
Measuring Range: 0.0-14.0 pH
Resolution: 0.10 pH
Accuracy: +/- 0.3 pH
Temp: 5-45°C (ATC)
Calibration: 1 point factory calibrated
Power supply DC9v battery
Display LCD with illumination, with hold function.
Features: Solid-pH tester features a unique refillable metal surface electrode that provides fast and easy on the spot pH measurements for food, oil, oil liquids, cheese, sausages, flesh products, fruitage and semi-solids, etc. Automatic switch-off function: After 10 minutes without pushing buttons, the meter will be switched off automatically.
                                          
4 in 1  Soil PH Instrument  AMT-300                        

Name

4 in 1 soil ph instrument

Type

AMT-300

Test objects

Sunlight, moisture, PH value, temperature

Test Range

Sunlight(9 levels)

LOW-, LOW, LOW+, NOR-,NOR, NOR+, HGH-, HGH, HGH+

Moisture(5 levels)

DRY+, DRY, NOR, WET, WET+

PHvalue(12 levels)

3.5~9.0 (display resolution 0.5)

Temperature

-9~+50℃（16~122℉）  （display resolution 1℃/1℉）

Power supply

One 9v block battery

Automatic off

The unit will be automatically off after 5 minutes disabling

Operating temperature

+5℃~+40℃

Size

Main unit

122mm*63mm*36mm

Test probe

Ø5mm*20mm

Weight

0.23kg

                                          
Swimming Pool SPA pH & Chlorine Water Tester KC-101               
Specifications:
Powered by: AA 1.5V battery
Tough plastic body
Ideal pH for pool: 7.2-7.8
Ideal Chlorine for pool: 1.2-1.7ppm
Size: 142 x 90 x 30mm
Benefits:
Spend less time testing and more time swimming
Save money on having to purchase new chemicals
Easy to handle and simple to store

                                          
 Lab Bench pH/mV/Temp Meter  AMT620           Manual

Highlights:
1. Auto/Manual pH Temperature Compensation
2. pH temperature compensation status auto estimation
3. pH electrode performance auto estimation
4. Auto ending
5. Complete GLP function
6. Up to 1024 sets measurement data saving
7. RS232 data communication port
8. Adapt to combined ph electrode with Pt1000/NTC30kΩ temperature sensor
Model AMT620 AMT620Pro
Range pH 0.00-14.00 -2.00-16.00
mV -2000 ~ +2000 -1999.9 ~ +1999.9
℃ -5.0 ~ 105.0
Accuracy pH 0.01 0.003
mV 0.1% 0.03%
℃ 0.5 0.3
pH TC Method Manual/Auto
pH TC Range 0.0~100.0℃
Calibration Method 1/2/3 points
Auto Ending yes
pH Sensor Status yes
Clock (GLP) yes
Data Capacity 64groups 1024groups
Saving Content (GLP)

number, measurement data, time, value, Temp, MTC/ATC
Sensor Data Saving Content (GLP)

sensor calibration date, time, method, ph buffer temp, TC method, sensor zero point, slope
Auto Saving -- yes
Timing Saving Function -- yes
RS232 Port -- yes
Bended Electrode Holder yes
PC Communication Software -- yes
Dimensions 200x160x55mm
Power DC9V (AV Adaptor)
                                          
Lab pH and Stirrer Combo AMT10                
Functions:
Large screen, LCD display, dual parameter, Automatic buffer recognition and two-point calibration.
Specifications:
1. Measuring range: pH: -2.00~19.99pH; mV: -1999～1999mV
2. Resolution: pH: 0.01pH; mV:1mV
3. Accuracy: pH: ±0.01pH; mV: ±0.1%FS
4. Input impedance>=1×1012Ω
5. Stability: ±(0.01pH ± 1byte)/3h
6. ATC: 0.0～60.0℃
7. Stir range: 0-1500RPM
8. Dimension: 210×320×90mm
9. Weight: 2kg
                                          
KL-016 Bench pH/mV/Temp Meter                
Measuring range:PH:0.00~14.00PH; mV:0~±1999mV; Temp:0~ 100℃
Accuracy: PH:±0.01pH; mV:±0.1% F.S ±1 digit; Temp: ±0.4℃
Resolution: PH: 0.01pH; mV: 1mV; Temp: 0.1℃
Environment Temperature: 0 ℃ ~ 50℃, Humidity:≤95%
Display: 4-digital LCD
Power Supply: AC110V/220V, 50/60Hz
Input Impedance: 1012Ω
Dimensions: 240×185×100mm3
Weight: 660g
Note: Standard packing no ORP probe. If add ORP probe order number KL-016R
                                          
PH-016A Bench pH Meter                                        
Technical Specification:
Measuring rang: 0.00~14.00PH
Accuracy: ±0.05PH
Resolution: 0.01PH
Environment Temperature: 0℃~50℃ Humidity: ≤95%
Display: 4-digital LCD
Power Supply: Input AC220V, Output DC6V
Input Impedance: 1012
Dimensions: 240×185×100(mm3) Weight: 736g

                                          
PHS-3C Bench pH/Temp Meter                              
Technical Specification:
Range: PH 0.00～14.00PH; °C: 0～100°C
Resolution: PH 0.01PH; °C: 0.1°C
Accuracy: PH ±0.02PH; °C: ±0.5°C
Display: PH 4-digital LED; °C: 3-digital LED
Automatic Temperature Compensation (ATC): 0°C～50°C
Power Supply: AC220V 50Hz; AC110V 50HZ
Operating Temperature: 0°C～50°C
Calibration: 2 points with auto buffer calibration.
                                          
PHS-3D-02 Bench pH/mV/Temp Meter                              
Technical Specification:
Range: PH 0.00～14.00PH; mV: ±1999mV; °C: 0～100°C
Resolution: PH 0.01PH; mV: 1mV; °C: 0.1°C
Accuracy: PH ±0.01PH; mV: ±0.1%F.S; °C: ±1°C
Data Record: 25groups, max/min record
Automatic Temperature Compensation (ATC): 0°C～100°C
LED with backlight,\
Operating Temperature: 0°C～50°C
Calibration: 3 points with auto buffer calibration, Weight and Size: 750g/160x190x70mm
                                          
KL-2601 Bench pH/Temp Meter                             
Range: pH: 0.00 ~ 14.00pH; Temp.: -9.9~99.9°C, 16~210°F
Resolution: pH:0.01pH; Temp: ±0.1°C/ ±1°F
Accuracy: pH:±0.05; Temp: ±1°C/ ±2°F
Calibration: 2 points
Power: DC9V
Operation conditions: Temperature: 5～60℃; Humidity: 95% maximum
Dimensions: 208×200×76mm
Weight: 390g
                                          
KL-2602 Bench pH/ORP/Temp Meter                  
Measuring Range: 0.00-14.00pH; MV: 0～±1999mV, Temp.: 0～100°C
Resolution: pH:0.01pH; ±0.1°C
Accuracy: pH:±0.01; mV:±1mV; °C:±0.4°C
Calibration: 2 points
ATC: 0～95°C
Power: DC9V or rechargeable battery
Operation conditions: Temperature: 5～60°C; Humidity: 95% maximum
Dimensions: 208×200×76mm
Weight: 480g
*Standard packing not include ORP probe, if add ORP probe, order number is KL-2602R
                                          
KL-2603 Bench pH/ORP/EC/CF/TDS Temp Meter           
Range: pH:0.00～14.00; mV:0～±1999mV; °C:0～100°C; EC:0.00～19.99ms/cm; CF:0.0～199.9CF; TDS: 10～19990ppm
Resolution: pH:0.01pH; °C:±0.1°C
Accuracy: PH:±0.01PH; mV:±1mV; ℃:±0.4°C; EC/CF/TDS: ±2%F.S.
Calibration: 2 points
ATC: 0～95°C
Power: DC9V or rechargeable battery
Operation conditions: Temperature: 5～60°C; Humidity: 95% maximum
Dimensions: 208×200×76mm
Weight: 510g
*Standard packing not include ORP probe, if add ORP probe, order number is KL-2603R
                                          
PH920/921/922 Precision pH/mV/ORP/Temp Meter          
PH92 series include the PH920, PH921 and PH922. The
meters are used to measure acidity, alkalinity or oxidation-
reduction potential of liquids.
Feature:
High resolution and accuracy (Up to ±0.002pH accuracy)
for precise measurement
Two-point push-button calibration with automatic buffer
recognition
Manual or automatic temperature compensation for best
accuracy under fluctuating temperatures
Viewing of electrode slope
Automatic operation message prompts
Expanded memory stores and recalls up to 99 data sets
Built-in real-time clock stamps for stored data
USB Communication interface
Model　 PH920 PH921 PH922　
pH Range -2.000~16.000pH -2.000~16.000pH -2.000~16.000pH
pH Accuracy ±0.005pH ±0.002pH ±0.002pH
mV Range 0~±1999.9mV 0~±1999.9mV 0~±1999.9mV
mV Accuracy ±0.2mV ±0.2mV ±0.2mV
ORP Range --- --- 0~±1999.9mV
ORP Accuracy --- --- ±0.2mV
Temperature Range 0~100oC, 32~212oF
Temperature Accuracy ±0.3oC
pH Calibration Points 2 points
Set Buffer NIST, pH4.00/6.86/9.18 or USA, pH4.01/7.00/10.01
Temperature Compensation 0~100oC, 32~212oF, Automatic or Manual
Memory 99 Data Sets with Date/Time stamping
Output USB Communication interface
Display 6.5' LCD
Power Requirements DC9V, using AC adapters, 220VAC, 50Hz
Dimensions 210(L)mm×188(W)mm×60(H)mm
Weight 1.5kg
                                          
PH930 Precision pH/mV/ORP/Temp Meter          

PH930 is a high accuracy meter used for measuring pH, Oxidation-Reduction Potential and ion concentration.
Feature:
Direct readout of ion concentration units
Two-point push-button calibration with automatic buffer
recognition
Manual or automatic temperature compensation for best
accuracy under fluctuating temperatures
Viewing of electrode slope
Automatic operation message prompts
Expanded memory stores and recalls up to 99 data sets
Built-in real-time clock stamps for stored data
USB Communication interface
 
Model PH930
pH Range -2.000~16.000pH
pH Accuracy ±0.002pH
Resolution 0.001pH
Ion Concentration Range 0~19999ppm
Ion Concentration Accuracy ±0.5%
Resolution 1ppm
mV Range 0~±1999.9mV
mV Accuracy ±0.2mV
Temperature Range　 0~100oC, 32~212oF
Temperature Accuracy ±0.3oC
pH Calibration Points 2 points, NIST, pH4.00/6.86/9.18 or USA, pH4.01/7.00/10.01
Ion Calibration Points 2 points
Temperature Compensation 0~100oC, 32~212oF, Automatic or Manual
Built-in Ion mode Na, Ag, K, NH3, CL, F, Ca, No3, Pb, I, Cu, Br, CN
Memory 99 Data Sets with Date/Time stamping
Output USB Communication interface
Power Requirements DC9V, using AC adapters, 220VAC, 50Hz
Dimensions 210(L)mm×188(W)mm×60(H)mm
Weight 1.5kg
                                          
Lab Bench pH/mV Meter AMT12                            
1. Two Points Push-Button Calibration: The meter with two points calibration function, and it will display the tip of standard buffer solution, You need only immerse the electrode in standard solution and press [CAL], then the meter will calibrate automatically.
2. Auto Recognition pH Standard Solution: In calibration, the meter will display tip automatically if you use standard solution by mistake or not by the direction.
3. Viewing of Electrode Characteristics: After calibration, the meter will indicate automatically electrode slope, You can judge by the icon to replace it or not.
4. Automatic Temperature Compensation function
5. Keypad and Electrode Holder: The meter with waterproof panel, it's user can not worry for the sample solution splashing over the meter. The electrode holder can be used conveniently.
pH Range　 0.00~14.00pH
pH Accuracy　 ±0.01pH
mV Range 0~±1999mV
mV Accuracy ±2mV
Temperature Range　 0~100℃
Temperature Accuracy ±1℃
ATC 0~99℃
Calibration Points Manual/Automatic
2 Points
pH Standard Solution NIST, pH4.00/6.86/9.18 or USA, pH4.01/7.00/10.01
Power Requirement 9V DC, Using AC adapters, 220V/50Hz
Dimension 210(L)×205(W)×65(H)mm
Weight　 1.5kg
                                          
PHS-3E Professional Lab pH Meter                            
CHARACTERISTICS:
1.With displaying LCD, blue back-light and double digital displaying
2.Auto and manual temp. compensation
3.Measuring or displaying pH and temp. or mV and temp. simultaneously
4.Two points calibration
SPECIFICATION：
1.Measuring Range: pH: -2.00~18.00pH; mV:-1999～+1999mV; Temp.:0～99.9℃
2.Resolution: pH:0.01pH; mV:1mV; Temp.:0.1℃
3.Accuracy: pH:±0.01pH±1bit; mV:±1mV±1bit; Temp.:±0.3℃±1bit
4.Input impedance:1×1012Ω
5.Stability:±0.01pH±1bit/3h
6.Temp. compensation range: 0～99.9℃
7.Temperature of measured solution: 0~60℃
                                          
KL-025 Serials Mini pH Meter                            
Technical Specification:
Range: 0.00 ~ 14.00PH
Accuracy: ±0.1PH
Resolution: 0.01PH
Operating temperature: 0℃~50℃
Power Supply: 4×1.5V(AG13) or AC110V~240V
Dimensions: 60mm×55mm×23mm
Weight: 62g

Order Number:
KL-025(I): Fix probe + normal 4x AG13 batteries
KL-025(II): Fix probe + rechargeable batteries + adaptor
KL-025(III): BNC changeable probe + 4x AG13 batteries
KL-025(IV): BNC changeable probe + rechargeable batteries + adaptor
KL-025P: changeable BNC probe

BNC Connector
                                          
KL-025M Mini pH Meter                                   
Specifications:
Measure Range: 0.00 ~ 14.00pH
Resolution: 0.01pH
Accuracy: ±0.1pH (∣T1-T2∣≤5°C)
±0.2PH(∣T1-T2∣>5°C)
(T1—The environment temperature, T2—The test liquid temperature)
Operating Temperature: 0°C~50°C
Power Supply: DC6V
Dimension: 112mm×86mm×57mm
Weight: 345g

                                          
KL-025N pH Monitor                                     
Order No:  KL-025N (without adaptor)
                   KL-025NA (with Adaptor)

Range: 0.00~14.00PH
Resolution: 0.01PH
Accuracy: ±0.1PH(│T1-T2│≤5℃); ±0.2PH(│T1-T2│＞5℃)
(T1:The environment temp, T2: The test liquid temp)
Operating temp: 0℃~50℃
Power: AC110~240V,with rechargeable battery
Dimensions: 100mm×70mm×25mm

                                          
KL-025T Online pH Monitor                                     
Range: pH 0.00 to 14.00 pH
Temperature: 0 to 55°C
Resolution: pH 0.01 pH; Temperature 0.1°C
Accuracy: pH ±0.1 pH; Temperature ±1°C
Temperature Compensation 0 to 50°C
Power Supply 6V DC (include), with adaptor
Environment 0 to 50°C
Humidity:≤95℅
Dimensions 60mm×55mm×23mm
Weight 75g
 

                                          
KL-025W Aquarium pH Monitor                                     
Measuring range: 0.0~9.9PH
Accuracy: ±0.1PH
Resolution: 0.1PH
Operating Temperature: 0℃~50℃
Automatic Temperature Compensation: 0℃~50℃
Calibration: 1 or 2 points with auto buffer recognition
Power Supply: 6V DC with adaptor
Dimensions: 105mm x 26mm x 17mm
Weight: 95g

                                          
KL-0253 Online PH & EC Monitor                                     
Range: pH 0.00 to 14.00 pH
TDS: 0 to 19.99ms/cm
Resolution: pH 0.01 pH; TDS 0.01ms/cm
Accuracy: pH ±0.1 pH; TDS: ±2%F.S
Temperature Compensation: 0 to 50°C
Power Supply 6V DC (include), with adaptor
Environment 0 to 50°C
Humidity:≤95℅
Dimensions 110 x 51 x 22 mm
Weight 200g

                                          
KL-055 Online PH & Temperature Monitor                                     
Range: pH 0.00 to 14.00 pH
Temperature: 0 to 55°C
Resolution: pH 0.01 pH
Temperature: 0.1°C
Accuracy: pH ±0.1 pH
Temperature ±1°C
Temperature Compensation: 0 to 50°C
Power Supply: 6V DC (include), with adaptor
Environment: 0 to 50°C
Humidity:≤95%
Dimensions: 65mm×26mm×40mm
Weight: 200g

                                          
KL-012 pH Meter                                     
Large-screen, high resolution and accuracy, reading convenient, fast and accurate. Measuring accurate, simple, rugged and durable, Economical and practical, fully in line with a wide range of industries need to test. The manual 2 point through trimmer to ensure the accuracy of measurement data. BNC with the composite electrode and 9 V battery folded, around the world to facilitate the replacement of batteries and electrodes. In short, a measurement a wide range of high precision, small size, the use of convenient, cheap and good products.

Range：0.00-14.00PH
Resolution：0.01PH
Accuracy：±0.05PH
Automatic Temperature Compensation：0℃～50℃
Power: DC 9V
Dimensions: 150mm×70mm×25mm
                                          
PHT-026 multi-parameter Water Monitor                        

Range:
PH:0.00~14.00PH; EC:0.00~19.99EC; °C:-50°C~70°C
°F:-58°F~158°F; CF: 0.0~199CF; TDS: 10~19990ppm
Resolution:
PH: 0.01PH; 0.1°C / 0.2°F
EC: 0.01EC CF: 0.1CF TDS: 10ppm
Accuracy:
PH: ±0.1PH; 1.0°C; EC, CF, TDS: ±2% F.S.
Operating Temperature: 0°C~50°C
Automatic Temperature Compensation: 0°C~50°C
Batteries: DC6V or 4×1.5V(AG13)
Dimensions: 155×86×22mm3 Weight: 223g
                                          
PHT-027 multi-parameter Water Monitor                        
(With ORP than PHT-026)
Range:
EC:0.00～19.99EC PH:0.00～14.00PH
CF:0.0～199.9CF mV:0~±1999mV
TDS:10～19990ppm; -50°C～70°C (-58°F～158°F)
Resolution:
EC: 0.01EC PH: 0.01PH
CF: 0.1CF mV: ±0.1% F.S. ± 1digit
TDS: 10ppm °C: 0.1°C/ °F:0.2°F
Accuracy:
PH: ±0.1 PH; °C: 1.0°C; mV:1mV
EC, CF, TDS: ±2% F.S
Operating Temperature: 0°C～50°C
Automatic Temperature Compensation：0°C～50°C
Batteries：DC6V or 4X1.5V（AG13）
Dimensions ：155×86×22 mm
                                          
PHT-028 multi-parameter Water Monitor                        
This indicator combines 6 meters into one easy to use wall mounting continuous monitor. Featuring a large, dual-level, back-lit LCD display the meter can display the EC/TDS/CF of your solution together with the choice of either pH, temperature or Oxidation-Reduction Potential (ORP).
Precision pH monitor immediately detects changes in solution pH. With a 6 V DC power supply included with the meter (also included rechargeable battery).It is with BNC composite electrode, around the world to facilitate the replacement of electrodes, used.
Measuring range:
PH: 0.00～14.00 PH; ℃: -50℃～70℃; EC: 0.00～19.99EC
CF: 0.0～199CF; TDS: 10～19990ppm; MV: 0~±1999mV
Resolution
PH: 0.01PH; ℃: 0.1℃; EC: 0.01EC; CF: 0.1CF; TDS: 10ppm; MV: 1mV
Accuracy:
 PH: ±0.05PH; ℃: ±1.0℃; EC/CF/TDS: ±2%F.S; MV: ±0.1%F.S±1digit
Automatic Temperature Compensation: 0℃～50℃
Operating Temperature: 0℃～50℃
Power Supply: 6V DC (include), with adaptor
Dimensions: 130mm×91mm×37mm
                                          
PHT-02636 multi-parameter Water Monitor                    
Six functional parameters, online continuous monitoring device, three-level LCD. Equipped with rechargeable batteries, BNC electrode.
Technical Specification:
Measuring range:
PH:0.00～14.00 PH; ℃:-50℃～70℃ (-58℉～158℉); RH: 10%RH-99%RH;      EC: 0.00～19.99EC; CF: 0.0～199CF; TDS: 10～19990ppm
Resolution:
PH:0.01PH; ℃:0.1℃(0.2℉); RH:1%RH; EC:0.01EC; CF:0.1CF; TDS:10ppm
Accuracy: PH:±0.1 PH;℃:1.0℃;RH:±5%RH;EC/CF/TDS:±2%F.S
Automatic Temperature Compensation: 0℃～50℃
Operating Temperature: 0℃～50℃
Power Supply: DC 6V(include), with adaptor
Dimensions: 140×76×16mm
                                          
PHT-02726 PH/TDS/EC Monitor                                      
Technical Specification:
Measuring range: PH:0.00～14.00PH; EC:0~19.99ms/cm;     0～1999us/cm; TDS:10～19990ppm
Resolution: PH:0.01PH; EC:0.01ms/cm; 1us/cm; TDS:10ppm
Accuracy: PH:±0.1PH; EC/TDS:±2%F.S
Automatic Temperature Compensation: 0℃～50℃
Operating Temperature: 0℃～50℃
Power Supply: DC 6V with adaptor
Dimensions: 110mm×96mm×22mm
                                          
KL-951 Seven In One Multi-parameter Water Quality Monitor                                  

Measuring Range

PH: 0.00～14.00 PH
℃: -50℃～70℃ (-58℉～158℉)
 RH: 10%RH-99%RH
EC: 0.00～19.99EC
CF: 0.0～199CF
TDS: 10～19990ppm
mV: 0~±1999mV

Resolution

PH: 0.01PH
℃: 0.1℃(0.2℉)
 RH: 1%RH
EC：0.01EC
CF：0.1CF
TDS：10ppm
mV：1mV

Accuracy

PH: ±0.1 PH
℃: ±1.0℃
 RH: ±5℅RH
EC/CF/TDS: ±2%F.S
mV: ±0.1% F·S±1digit

Automatic Temperature Compensation

0℃～50℃

Operating Temperature

0℃～50℃

Power Supply

DC 6V(include), with adaptor

Dimensions

130mm×118mm×35mm

Weight

450g

 
                                          
KL-221 Digital pH and Temperature Controller                              

Measuring range

pH

0.00 ~ 14.00 pH

Temp

0～50℃ (32℉-122℉)

Resolution

pH

0.01 pH

Temp

0.1℃ (0.2℉)

Accuracy

pH

±0.02pH

Temp

±0.5℃

Display

pH

4-digital LCD

Temp

3-digital LCD

ATC

0 ~ 50°C

Calibration

2 points with auto buffer recognition

Set Range

0 ~ 14PH (High or Low)

Relay contact

5A/240VAC

Environment

Temperature:0~50℃ Humidity<95℅

Power Supply

220V±10℅ 50Hz±2℅

Dimensions

95 x 61 x 20 mm

Weight

550g
 

                                          
KL-803 Digital pH and ORP Controller                              
Technical Specification:
Measuring range: PH 0.00 ~ 14.00; ORP: -1999～+1999MV
Accuracy: PH ±0.1% + 2 digits; ORP: ±5MV
Resolution: PH 0.01PH, ORP: 1MV
Set Range: PH 3.50～10.50PH, ORP: -500~500MV
Display: 4-digital LCD
Environment Temperature:0 ~ 50°C, Humidity < 95%
Power Supply: 220V±10% 50Hz±2%
Dimensions: 160mm×102mm×40mm, Weight: 872g

                                          
KL-2012 Digital pH and ORP Controller                            
Technical Specification
Measuring range: PH:0.00~14.00PH; ORP:-1999~1999mV
Accuracy: PH±0.1%+0.02PH; ORP:±5mV
Resolution: PH:0.01PH; ORP:1mV
Set Range: PH:3.50～10.50PH; ORP:-500~500mV
Environment: Temperature:0~50℃ Humidity<95℅
Display: double 4 LED display reading
Dimensions: 150mm×85mm×40mm

                                          
KL-601 Digital pH Controller with Temperature              
Technical Specification:
Measuring range: PH 0.00 ~ 14.00; Temperature: 0～100°C
Accuracy: PH ±0.1% + 2 digits; Temperature: ±0.4°C
Resolution: PH 0.01PH, Temperature: 0.1°C
Set Range: PH 3.50～10.50PH
Display: 4-digital LCD
Environment Temperature:0 ~ 50°C, Humidity < 95%
Power Supply: 220V±10% 50Hz±2%
Dimensions: 160mm×102mm×40mm

                                          
KL-100 Digital pH Controller                                     
Measuring range: 0.00~14.00PH
Accuracy: ±0.02PH
Resolution: 0.01PH
Set Range: 3.50～10.50PH
Relay contact: 5A/240VAC
Environment Temp: 0~50℃ Humidity<95%
Display: 4-digit LED
Input Impedance: 1012Ω
Dimensions: 108×210×48mm
Weight: 550g

                                          
KL-201 Digital pH Controller                                     
Measuring range: 0.00~14.00PH
Accuracy: ±(0.1%+2 digits) after calibration
Resolution: 0.01PH
Set Range: 3.50～10.50PH
Environment Temp: 0~50℃ Humidity: <95%
Dimensions: 150mm×85mm×40mm
Weight: 580g

continuous and accurate pH reading. It also offers alarm when pH reading is out of the user preset range. The alarm feature can be set for either high or low position.
                                          
KL-211 Digital pH Controller with Backlight                                     
Measuring range: 0.00~14.00PH
Accuracy: ±(0.1%+2 digits) after calibration
Resolution: 0.01PH
Set Range: 3.50～10.50PH
Environment Temp: 0~50℃ Humidity: <95%
Dimensions: 150mm×85mm×40mm
Weight: 580g

                                          
KL-201W Professional Waterproof  Digital pH Controller                
Technical Specification:
Measuring range: 0.00~14.00PH
Accuracy: ±(0.1%+2 digits) after calibration
Resolution: 0.01PH
Set Range: 3.50～10.50PH
Environment: Temperature:0~50℃ Humidity:<95%
Dimensions: 165mmx158mmx121mm and packed by excellent aluminum box.

                                          
KL-203 Digital pH/ORP Controller                  
Measuring range: PH 0.00~14.00PH; ORP:0~±1999mV
Accuracy: PH: ±(0.1%+2 digits) after calibration; ORP:±5 mV
Resolution: PH:0.01PH; ORP: 1mV
Set Range: PH:3.50～10.50PH; ORP:0~1000mV
Environment Temp: 0~50℃ Humidity <95%
Dimensions: 150mm×85mm×40mm

                                          
KL-301 Digital pH Controller                  
Measuring range: 0.00~14.00PH
Accuracy: ±0.1%+2 digits
Resolution: 0.01PH, Set Range: 3.50～10.50PH
Environment: Temperature:0~50°C Humidity<95%
Power Supply: 220V±10% 50Hz±2%
Dimensions: 160mm×102mm×40mm
Weight:772g

                                          
KL-303 Digital pH/ORP Controller              
Technical Specification:
Measuring range: PH:0.00~14.00PH; ORP: 0~±1999mV
Accuracy: PH:±0.1% + 2digits; ORP:±5mV
Resolution: PH:0.01PH; ORP:1mV
Set Range: PH 3.50～10.50PH; ORP: 0~1000mV
Environment Temperature: 0~50℃ Humidity<95℅
Dimensions: 160mm×102mm×40mm

                                          
KL-018 Digital pH Controller             
It is an accurate secondary instrument with LED digital display. it is applicable to determine pH value of water solution in departments of petroleum, chemical, medicine-produce ect.
Technical Specification:
Measuring range: 0.00 ~ 14.00PH
Accuracy: ±0.02PH
Resolution: 0.01PH
Output current: 4-20mA
Automatic temperature compensation: 0 ~ 100℃
Warning accuracy: ±0.02PH
Environment Temperature:0 ~ 50℃; Humidity: <95%
Display: 4-digital LED
Input Impedance: 1012Ω
Power Supply: 110/220V, 50/60Hz
Dimensions: 96×96×160mm3
Weight: 950g

                                          
KL-2000 Digital pH/ORP Controller             
Measurement Range: 0-14.00pH; mV:–1000~1000mV
Accuracy: 0.1pH; 1mV
Output: 4-20mA, max load 1k
Control action:  ON/OFF max 220VAC/max3A/max600VA
Calibration: 2 points
Environment: 0-60℃
Install Size: 92x92x110mm
Power supply: 220VAC 50Hz or 110VAC 60Hz
Net weight: 200g
 

                                          
KL-6241 Industrial Online pH/ORP Controller             
3-1/2 digit LED digital display, which can display pH value, mV value, temperature value, high and low limit values of range as well as error mark..
Stable internal storage memory, parameters and other information will not be lost in case of power off.
Automatic identification of pH buffer solution, three-point calibration, which improves the measurement accuracy of the instrument.
With functions of over-limit alarm and control, data setting by touch, setting of relay acting point within all-range, and with a setting of backlash area to protect the relay from too frequent jumping around the setting point.
Transferable 4-20mA photoelectric isolated output, with transfer values corresponding to high and low limit values, that is, 4mA corresponding to low limit value and 20mA corresponding to high limit value.
pH measurement Range

0～14 pH
Resolution
0.02 pH
Accuracy
±0.1 pH
Electrode pressure resistance: 0～0.6Mpa
Power supply: AC 220V±10%   50Hz
Distance limit of measurement: ≤40m (standard configuration for electrode cable: 10m). Please use pH transducer for overlong range.
Contact capacity: 3A（240V AC）
Temperature of measured solution: 0～80℃
Environment conditions: humidity: ≤85%/RH; no strong electro-magnetic field interference except earth magnetic field
Manual temperature compensation: 0～99℃
Outline dimensions: 96×96×120mm (height×width×depth)  instrument panel hole: 92×92mm
Installation mode: jam-in

                                          
KL-4571 Industrial Online pH/ORP Controller            
Performance Features
KL-4571 is on-line intelligent industrial pH/ORP controller. The instrument is suitable for online monitoring of pH/ORP in water treatment, electronic power, chemical industry, pharmacy, environment protection, breeding industry, and so on.
Main technical specifications
pH measurement range: 0～14pH; resolution: 0.01pH; accuracy: ±0.1pH
ORP measurement range: -1999mV ~ +1999mV; resolution:±1mV; accuracy:±5mV
Temperature measurement range: 0~99.9℃; resolution: 0.1℃; accuracy:±1℃
Display: LCD
Automatic temperature compensation: 0～99.9℃.
Stability: pH≤0.05pH/24h, ORP≤2mV/24h, Temp.≤0.2℃/24h, ≤0.03mA/24h.
Identify automatically pH buffer and three point calibration.
pH standard liquid: 4.01, 6.86, 9.18
ORP standard liquid: any
Input impedance: >1.5×1012
Electrode pressure resistance: 0~0.6MPa
Measuring distance: ≤20m (standard configuration for electrode cable: 10m). Please use pH transducer for overlong range.
Control range: 0~14pH; -1999mV ~ +1999 mV
The mode of control output: high limit, low limit double rode ON/OFF double contact point output.
Capacity of contact point: AC230V/5A Max; AC 115V/10A Max
4~20mA current output: isolated, transferable, reverse, optional meter/transmitter output.
Circular resistivity: 500ΩMax@24V DC
Power supply: AC 220V±10% 50Hz
Environment conditions: temperature:0～50℃; humidity: ≤85%/RH;
Control mode: Relay control
Load capacity of the relay: AC230V/5AMax ;AC115V/10A Max
Displaying: pH/ mV /temperature value
Searching: the Hi/Lo limited measurement range, the error marks
Outline dimensions: 96×96×130mm (height×width×depth)
Slot dimension for installation :91×91mm(height × width)
Installation: Jam-in
                                          
KL-6658H pH/ORP Controller                             Manual
 
Power supply
AC 220V(160—250V)50Hz
Power unit
<5W
Accuracy
0.01PH;1mV
Measurement range
0~14PH; -999mV~999mV
Set point
2
Environmental temperature
0~50℃
Display
Four-level LED LCD instructions
Environmental humidity
35-85％RH
Parameters preservation
10 years
Output model
ON/OFF        4~20mA
Output capacity
AC 250v/3A     DC30V/3A
Input impedance
≥1012Ω
Insulation R
≥10MΩ
Size
96mmX96mmX120mm
 

                                          
KL-5431 pH Transmitter                                     
Performance features
It is used for long distance PH signal collecting or industry control system. It can display realtime PH signal and output 4～20mA analog signal.
It's with various software functions, and has such features as easy installation and operation, strong anti-interference capability and little amount of maintenance work. High-accuracy temperature and PH operation value compensation is also adopted.
Main technical specifications:
LCD digital light background display
Fully Waterproof integrated design
With adoption of microchip for data processing, the reading is direct and the control is accurate.
Automatic identification of pH buffer solution, three-point calibration for selection
Transferable 4～20mA photoelectric isolated output
With function of compensation for error of menu input operation
It can display pH and mV optionally.
PH measure arrange:0～14PH
Resolution:0.01PH
Accuracy:0.1PH
Analog signal output: Transferable 4～20mA photoelectric isolated output
With resistive load: :500ΩMax@24V DC
Electrode pressure:0～0.6MPa
Power supply: DC 24V ±10%
Measure distance:≤ 20m
Environment conditions: (1) temperature: 0～50℃ （2）humidity no requirements
Manual temperature compensation:0～99℃
Outline dimensions: 130×70×50mm (height×width×depth)
Installation: Pipe or plane installation